ONE RHC READING HARDWARE # 858 3/4 MORTISE LOCK with KEYS - RECONDITION (14656)

Description

eBay Listing Template r1
IF YOU DON'T SEE THE LOCK YOU NEED, ASK US, WE HAVE        HUNDREDS & HUNDREDS OF OLD VINTAGE LOCKS IN STOCK!
PRICE IS FOR EACH:  ONE RHC READING HARDWARE # 858 3/4 MORTISE LOCK with KEYS - RECONDITION  (14656)
Vintage, Circa 1890-1920, key works just fine, very nice, Reading Hardware Co., works perfectly.  NOTE: the 858 3/4 was made in at least two different sizes, so compare the size numbers outlined below carefully to the one you are replacing.
The lock is reversible.
FACEPLATE:
Faceplate is Japanned steel, 5 3/8" long, 7/8" wide, 1/8" thick.
BOX:
Box is 3 1/4" deep from the front edge of the face plate and it is 3 3/4" top to bottom.
SCREWS:
Screw holes are on 4 1/2" centers.
BACKSET:
Backset (the distance from the front edge of the face plate to the center of the knob post hole) is 2 1/2".
DROP:
Drop (the distance from the center of the knob post hole down to the center of the round portion of the key hole) is 2 1/4".
KNOB POST:
The lock requires a standard 5/16" knob post.
KEY:
The lock comes with one functioning key.
FIVE AVAILABLE AS THE AUCTION BEGINS:  High quality, functions perfectly and comes with the key.  As the auction for this begins, we have four of them available.
SEE OUR FULL INVENTORY of MORTISE LOCKS & KEYS HERE!
Village Salvage • 85 S. Main Street • P.O. Box 284 • Waynesville • Ohio • 45068